Easy to transport only 25 Kg, 360 degrees rotation, With Adjustable Crank, Beam Reach 80 cm . Integrated Winch and Cable, including 18 meter wire rope (d5 mm) with hook, , Optional: zinc-plated finish (6 - 8 micron) (EV) , ATEX certified (EX). Maintenance
Easy to transport only 25 Kg, 360 degrees rotation, With Adjustable Crank, Beam Reach 100 cm . Integrated Winch and Cable, including 13 meter wire rope (d5 mm) with hook, , Optional: zinc-plated finish (6 - 8 micron) (EV) , ATEX certified (EX). Made in Ho
These low headroom hoist-trolley combinations are only supplied with Rema® Select 200OD hand chain hoist.
High capacity robust chain hoist WLL 20 or 30 Tons Equipped with a double pawl system Galvanized load chain Grade 8. CE Marked EN 13157, EN 818-7 standards
H-100 is a robust hand chain hoist designed for heavy and increased loads, bearing safety, ergonomics and low operating effort in mind. WLL from 0.5Ton up to 5 Ton CE
Quality hand chain hoist Very compact and light 5.5Kg body Safety factor 4.8 easy to carry. Strong and dimensionally stable housing due to high-quality metal. WLL from 0.5Ton up to 5Ton CE Made in Japan
Lifting clamps for safely transporting steel plates in vertical position. For lifting steel plates up to a hardness of 37 RC (345 HB). Suitable for lifting, 180 ° turning and vertical transport of steel plates.. Marking: According to standard, CE-marked S
SR Serie is an advanced-design electric chain hoist exhibiting such important features such as the very high duty cycle and modular assembly.
SR is technically advanced electric chain hoist with the most important advantages being the very high duty cycle and modular construction.
SR 230 V electric chain hoists are available in several designs and they have the same advantages as standard 400V models i.e. safety slip clutch/brake assembly, low construc-tional height etc. For the 1-phase connection, wire having a minimum cross-secti
Beta 230 VAC electric chain hoists are light weight, compact and ideal for light installation work.
Adjustable spindle beam clamp for establishing a semi-permanent suspension point on angle steels.
REMA RMBCV with adjustable jaws is an adjustable spindle beam clamp that grips the flange of the beam in an optimal way.
For use as a (temporary) lifting point in spaces with HP- (bulb) profiles, like sectional ship parts and ship engine rooms.
REMA Geared Trolley 117, UP to 30 Tons, Beam Width 124-305, Operating height 3 meters. Marking: According to standard, CE-marked. Standard: EN 12100, EN 13157
REMA Block Lifting Clamps CBKN, Up To 3 tons . 2 Special Synthetic Anti-Friction Pads to guarantee non-marking. Marking: According to standard, CE-marked Standard: EN 13155, EN 12100
Warning: The surface roughness of the material to be hoisted must have
Lifting clamps for safe transportation of steel plates in horizontal position. For hoisting steel plates up to hardness 37 RC (345 HB).
Board lift to use when mounting boards in the roof. Stable and robust construction which makes the work easy and safe on any underlay. Available in two models. Load capacity up to 70kg CE certified
Vertical lifting Clamp for hoisting and transporting steel plates from any position. Adjustable jaw in 30 mm steps. Strong, lightweight, CE-marked. For steel up to 37 RC (345 HB). Min load: 10% of WLL. Safety factor 5:1. Complies with EN 12100 & EN 13155.
REMA CNMA Vertical Non-Marking Lifting Clamp for stainless steel, aluminum, wood, and stone. Features synthetic jaws to prevent damage, 1–180 mm adjustable opening, 500 kg WLL, CE-marked. Complies with EN 13155 & EN 12100. Made in the Netherlands.
CNM vertical non-marking lifting clamp for delicate materials like stainless steel and aluminum. WLL 0.5 ton, jaw opening 1–20 mm. Non-marking pads, CE-marked, complies with EN 12100 & EN 13155. Sold by Salesbridges. Made in The Netherlands.
The RIH Stainless Steel Hand Chain Hoist is designed for cleanrooms and corrosive environments. Made in The Netherlands and sold by Salesbridges, it features electropolished stainless steel components and chains for hygienic, durable, and safe lifting.
BETA Electric Chain Hoist by Salesbridges, made in The Netherlands, offers reliable, safe lifting with 125 kg and 200 kg WLL. Lightweight and compact, it features overload protection and a self-locking brake for precision in workshops and maintenance.
The Type BT Beam Traverses provide secure load distribution for lifting long or bulky materials. Engineered for 2,000kg to 6,000kg capacities, these steel beams prevent load deformation during hoisting operations.
