Barrel Clamp for Horizontal Lifting- Opening 5-900 mm

Barrel clamp  | Horizontal Lifting-600Kg

Designed for horizontal lifting, handling and transport where (oil) drums must

Remain in a lying position. This clamp is used on the edges of a steel drum.

These clamps enable simple, hassle-free lifting and transport of steel drums in a vertical direction. The clamps have an automatic locking mechanism. In addition, they are maintenance-friendly with easy-to-change parts.

• The drum clamp can be used on both drums with and without lids.

• Can only clamp steel drums that have a raised edge.  An edge on which a lid can be mounted with a clamp. Without a raised edge, the clamp cannot attach itself. this clamp is used on the edges of a steel drum.

• Designed for lifting, handling and transporting of (oil) drums, where the drums have to stay in a laying position.

• Single clamp application on empty or filled drums.

• During lifting and transportation the center of gravity of the drum is always below the lifting point.

• Jaw opening: 500 - 900 mm

• WLL: 600kg

• Standard: NEN-EN 13155

They are semi-automatic, with the tongs located at the edges and as the clamp/pliers are lifted, the weight causes the tongs to grip and hold tightly to the steel drum until it is put down again.

 During lifting and transporting, the center of gravity of the steel drum is always below the lifting point