Scaffolding Steel Galvanized base frame 200 x 73

Scaffolding Steel Galvanized base  frame 200 x 73

The steel frames are available in the standard system width of 732 mm and four heights (66, 100, 150 and 200 mm).

the frame being 200 mm is the base frame and the rest mainly used on the lowest floor scaffolding - for leveling on a slope, the exact fit of the structure to the body of the object, such as also in scaffolding with the use of girders, or various non-standard solutions.

The frames are the main working element after assembling the scaffolding in a vertical position, consisting of two racks connected by horizontal crossbars.

Description of the base  frame 200 x 73 cm :

• Base frame

• Made of steel

• ELEMENTS MADE IN LASER CUT

• AUTO WELDING TECHNOLOGIES

• Width :73.2 cm

• Height : 2.0 m

• Weight :19.2 Kg

Description of the Lowest floor scaffolding frame:

• L x W : 150 x 73 cm   

             weight : 16.2 Kg

• L x W : 100 x 73 cm

             Weight : 12.2 Kg.

• L x W : 66 x 73 cm

             Weight : 10.5 Kg

Frame stands :

• Made of steel structural S235 with increased strength (Re > 320 MPa).

• Vertical elements

• Made of a single pipe section 

• Outer diameter 48.3 mm 

• Metal thickness of 2.7 mm (technology cold extrusion of the end of the pipe)

Pins 

• Used to assemble the frame

• Outer diameter 38 mm

•  Lower frame crossbar (with mounting pin curbs) stiffens the structure and constitutes protection against self-rising scaffolding platforms.

• Upper crossbar, made of a special U-profile, it is used to fasten the platforms.

It is propped up on both the ends with struts that reinforce the profile load bearing, but are also used to mount one end vertical longitudinal brace. The design of the frame provides for the installation of two handrails - in special pockets with wedge locks.

MADE IN EU